منابع و مأخذ:

[1] S. E. Abo-shady  “Analysis of self-dual excited synchronous machine” IEEE Trans. on Energy Conv.,  vol. 3,  no. 2,  pp.305 -322 1988.

[2] P. Kundur  “Power System Stability and Control”,  pp.315 -340 1993 :McGraw-Hill, Inc.

[3] “ANSI/IEEE Std. 421.1 1986”, An American National Standard/IEEE Standard Definitions for Excitation Systems for Synchronous Machines,  1985

[4] Jianxin Tang “PID controller using the TMS320C31 DSK with on-line parameter adjustment for real time dc , motor speed  and  position  control”IEEE-ISIE-2001 pp-  786-791.

[5] Sahbani, A., Ben Saad, K. & Benrejeb, M. (2008), “Design procedure of a distance based Fuzzy Sliding Mode Control for Buck converter,” International Conference on Signals,   Circuits & Systems, SCS 08, Hammemet, 2008.

[6] H. Akagi, “Control strategy and site selection of a shunt active filter for damping of Harmonic propagation in power distribution systems,” IEEE Trans. Power Delivery, vol.12, pp. 354 – 363, Jan.1997.

[7] Peter Butros,”Simulations of Rotating Brushless AC ExcitationSystem with Controlled Thyristor Bridge Rectifier for Hydropower Generators” Examensarbete 30 hp December 2011.

[8] “General Electric Power System Stability”, Lecture Note of 1979/1980, Power System Engineering Course.

[9] “421.5 1992IEEE recommended Practice for Excitation System Models for Power System Stability Studies”,  IEEE Std, 1992.

[10] Chan-Ki Kim ; Korea Electr. Power Res. Inst., Daejon, South Korea Hong-Woo Rhew ; Yoon Ho Kim ;” Stability performance of new static excitation system with boost-buck converter” IEEE 1998.

[11] Hong-Woo Rhew, Seung-Ki Sul, Park, M.-H ” A new generator static excitation system using boost-buck chopper” ;  ;Dept. of Electr. Eng., Seoul Nat. Univ., South Korea.

[12] Robert W. Erickson “Fundamentals of Power Electronics. Second Edition. Secaucus, NJ, USA: Kluwer Academic Publishers, 2000. p 241.

[13]M .H . Rashid “power electronics handbook” 2nded Academic press  1998.

[14]N.Mohan, T. M. Undeland, and W. PRobbins, Power Electronics: ConvertersApplications andDesign:Wiley,1989 pp170 to pp172.

[15] Mattavelli P., Rossetto L., Spiazzi G. and Tenti P General-purpose sliding-mode  controller for DC/DC converter applications,”  in Power Electronics Specialists Conference, PESC’93 Record., 24th Annual IEEE, 609 615(1993).

[16] He Y. and Luo F.L., Sliding-mode control for dc-dc converters with constant switching frequency, Control Theory and Applications, IEE Proceedings, 153, 37-45(2006).

[17] S.C.Tan, Y.M.Lai, M.K.H, Cheung, and C.K.Tse, “On the practical design of a sliding mode voltage controlled buck converter “IEEE Trans.Power Electron, vol.20, no.2, pp.425-437Mar 2005.

[18] G. Spiazzi and P. Mattavelli, “Sliding-mode control of switchedmode power supplies in The Power Electronics  Handbook . Boca Raton, FL: CRC Press LLC, 2002, ch. 8. ”

[19] Hao-Ran Wang; Guo-Rong Zhu; Dong-Hua Zhang; Wei Chen; Yu Chen”On The Practical Design of a Single-Stage Single-Switch Isolated PFC Regulator Based on Sliding Mode Control” IEEE conf.Power Electron, vol.1, pp.719-724, 2012.

[20] S.B.Guo, X.F.Lin-Shi, B.Allard, Y.X.Gao, and Y.Ruan, “Digital  Sliding mode controller for high-frequency DC/DC SMPS, “IEEE Trans.Power Electron., vol.25, no.5 pp.1120-1123, May 2010.

[21] V. M. Nguyen and C. Q. Lee, “Indirect implementations Of sliding mode control law in buck-type converters,” in Proc. IEEE Applied Power Electronics Conf. Expo (APEC), vol. 1,  Mar. 1996 pp. 111–115.

[22] Yu Chen and Yong Kang, “The Variable-Bandwidth Hysteresis Modulation Sliding-Mode Control for the -PWM–PFM Converters IEEE Trans. Power Electron., vol.26, no.10 “, pp.2727-2734,Oct 2011.

[23] P. Mattavelli, L. Rossetto, G. Spiazzi, and P. Tenti, “Generalpurpose sliding-mode controller for dc/dc converter applications in Proc. IEEE Power Electronics Specialists Conf. (PESC), Jun 1993, pp. 609–615

[24] Yu Chen and Yong Kang, “The Variable-Bandwidth Hysteresis Modulation Sliding-Mode Control for the-PWM–PFM Converters IEEE Trans. Power Electron. 2011”, vol.26, no.10, pp.2727-2734,Oct.

[25] Paul C.Krause, Oleg Wasynczuk, “Analysis of Electric machinery and Drive Systems”.

[26] Reza Kazemi, Mohammad Tavakoli Bina, “A Complete Excitation-Shaft-Bearing Model to Overcome The Shaft Induced Voltage And Bearing Current”, 2011 2nd Power Electronics, Drive Systems and Technologies Conference.

[28]. Bengt Johansson, “DC-DC Converters -Dynamic Model Design and Experimental Verification” Doctoral Dissertation in Industrial Automation Department of Industrial Electrical Engineering and Automation.

[29]. B. Umesh Rai (2012). S-Function Library for Bond Graph Modeling, Technology and Engineering Applications of Simulink, Prof. Subhas Chakravarty (Ed.), ISBN: 978-953-51-0635-7, InTech.